Can You Connect A Turntable Directly To Speakers?

Do you need speakers for Audio Technica turntable?

Best answer: Yes, as this turntable has no built in speaker.

But it does have it’s own built in amp.

So you don’t need an individual amp or amp/receiver.

But you do have to have a speaker with it’s own power source, like computer speaker or some of the larger portable stereo speakers that are out now..

Can I connect a turntable to my Bose?

Can I plug the turntable into my Bose or do I need something else? Yes, you certainly can! The turntable comes with an adapter cable that lets you plug a standard 3.5mm cable into the built-in phono auxiliary outputs.

What’s the difference between a record player and a turntable?

“For the record,” a record player is generally thought of as a turntable with a built-in amplifier and speaker(s). Portable units are typically record players. … In a word, turntables are intended to be instruments, but their quality can range from toy-like objects to high precision devices.

How do I connect Edifier speakers to Audio Technica turntable?

Connect the RCA (red and white) plugs from the turntable cable to the included RCA (female) to 3.5 mm (1/8″) mini-plug (male) adapter cable, making sure to match red plug to red plug and white to white. Then connect the adapter cable’s 3.5 mm mini-plug to the powered speakers’ Line Level* input.

Can I use aux input for phono?

If you have a “phono” input, plug your turntable in there – you won’t need a phono pre-amp. … If that’s the case plug the turntable into a spare input, like the auxiliary or “aux” ports. Don’t plug it into a “phono” input or you may blow your speakers up.

Do I need a ground wire for my turntable?

Turntables that do not have a built-in preamp need grounding. Turntables that need grounding feature a cable that needs to be attached to your preamp (whether it’s an external preamp, mixer, amplifier). Turntables that are not grounded will produce an obvious humming sound.

Why is there a ground wire on turntable?

The ground wire earths the chassis of the turntable, mainly the tone arm, to reduce this voltage. Its resistance is lower than the signal wires, but more importantly, it earths the chassis, which is then weakly coupled to the signal wires.

How do I convert phono to aux?

The receiver does not have a built-in phono preamp. Simply plug the turntable’s audio signal cable into one of the receiver’s analog audio inputs. These inputs are oftentimes labeled Aux (auxiliary), Line In, Analog In, etc. You can even use your receiver’s “CD” or “Tape” input, if needed.

Can I connect a turntable to my surround sound?

To connect your turntable to a home theater setup, you need a phono preamp. This device correctly equalizes the turntable’s audio signal. It’ll either be built into the turntable or the receiver, or you’ll need to buy a separate device.

Do you need a receiver with a turntable?

You’ll want a system that consists, at the very least, of a turntable, a receiver and a good set of speakers. You simply can not go without a receiver or amplifier and expect to sound quality to still be top notch.

What happens if you don’t ground a turntable?

To avoid that hum emanating from your turntable, you need to ground it correctly to your amplifier. Not only will this minimize, or even get rid of, the hum, but it will help your turntable reach its full potential, giving you the best quality sound it can possibly produce.

How far should speakers be from turntable?

How far apart? This depends on the size of your speakers, the distance to your listening position and the size of the room, but a good place to start is two metres (or a slightly less snappy, 6.56ft if you’re doing this in Imperial).

Can you connect a turntable to AUX?

If your receiver does not have a phono input, don’t worry – many turntables have their own built-in preamp. (You can verify this in the owner’s manual.) As long as this is the case, you can use any receiver input, such as the ones labeled “Line,” “Audio,” “CD” or “Auxiliary.”

Do you need external speakers for a record player?

Turntables need an external amplifier and speakers to play records. They usually offer much higher sound quality than record players with the speakers built-in. But turntables won’t be as compact, cute, and affordable as record players.

How do I connect my Sony record player to speakers?

Try unpairing and pairing your speaker or headphones.Press the. /PAIRING button on your turntable and then wait for a while.Press the. /PAIRING button on your turntable to pair your audio device again.

What speakers go with Audio Technica turntable?

5 Powered Speakers for Audio Technica AT-LP60 and AT-LP120 TurntablesThe Easiest Turntable Setup.Receiver vs Powered Speakers.Powered Speakers Comparison.Logitech Speaker System Z323 with Subwoofer.Alesis M1 Active 320 USB.M-Audio Studiophile AV 30 and AV 40.Mackie CR3 Multimedia Monitors.More items…•

What kind of speakers do I need for a turntable?

You will need some kind of speakers to play the music from your turntable. Your main choices are passive or powered speakers. Passive speakers do not have their own built-in amplifier and are powered by a separate amp such as an A/V receiver. These speakers are connected via speaker wire to the amplifier.

Do all turntables need speakers?

Most mid-range turntables don’t have a speaker built-in, so you’ll need to supply your own. You might also need to supply your own phono preamp since most players aren’t powerful enough to drive the speakers without one. Suddenly, you’re budgeting for a whole lot more than just a record player.

Are Bluetooth record players any good?

Bluetooth will not reduce the sound quality of an entry-level turntable that much. However. In audiophile vinyl setups, Bluetooth may reduce the sound quality of the system noticeably.

Can I make my speakers wireless?

If you have Android or iPhone, you can use it to send music to a Bluetooth receiver connected to a traditional amplifier, stereo, or home theater receiver, which, in turn, connects to your wired speakers.

How do you hook up old turntable to speakers?

Use the Right Cables On the turntable side of things, there are typically two RCA jacks (a red one and a white one). If your Bluetooth speaker also has two RCA jacks, then you’ll need a set of RCA cables. However, most Bluetooth speakers don’t have RCA inputs, they have a single 3.5mm AUX input.