Is The Dodge 360 A Good Engine?

What’s the difference between a 318 and a 360?

360 is externally balanced while the 318 is internally balanced (might have that backwards).

42 cubic inches difference.

Bore and stroke are bigger on the 360..

Are 318 and 360 intakes the same?

The 360 heads and Intake swap will fit on the 318, but the compression will be around 7.2:1, which is not very good for performance, which is not to say that the heads cannot be shaved .

What truck breaks down most?

More videos on YouTubeJ.D. Power Vehicle Dependability Survey Results 2005-2019Ford F-150Chevrolet Silverado 2500 HD20182015Toyota TacomaChevrolet Silverado42 more rows•Apr 2, 2019

How much HP can a 350 handle?

a typical 350 Chevy can make upwards of 350 – 375 HP before you exceed the reliability of the components. For a big block with the same stock components it can make in the area of about 400 to 475 or so HP and handle upwards of about 500 HP before you exceed the reliability of the stock cast pistons.

How much horsepower can a 340 make?

So much for Chrysler’s claims! With the single four-barrel cast-iron factory dual-plane intake and exhaust manifolds, the basically stock 340 revealed the glorious truth with 320.3 horsepower at 5,500 rpm.

What is the most reliable Chevy engine?

Dependable Chevys: These are the Most Reliable Silverado Engines6.0-Liter V-8 Hybrid. … 6.0 L Vortec 6000 V8. … 5.3-Liter V-8. … 4.3-Liter V-6. … 6.2-Liter V-8. … Duramax 6.6-Liter Turbo-Diesel V-8.

Is the Dodge 5.9 a good engine?

The 5.9L/360 is actually a good engine. I had a 1997 Ram and a 2001 Ram with that engine and they are very reliable. Not powerhouses at least compared to the V8’s we see in trucks and suv’s today( back then they were pretty stout )but a good dependable engine if taken care of.

How much power can a 5.9 Magnum handle?

The Engine Magnum 5.9 engines commonly carried a rating of 245 horsepower, with the tiny factory hydraulic roller camshafts delivering a hair over . 400-inch lift.

How much HP can a 318 make?

The 318 engine is absolutely the best all-around small block Mopar, in my opinion. It can easily make 400 plus horsepower and still has great street manners. If you’re building for fuel economy, the 318 beats the Mopar 340 and 360, hands down. The 318 was produced in three versions: polysphere, LA series, and Magnum.

How much HP does a 318 engine have?

The 318 (5.2 Liter V-8)USA specifications273 V8318 V8 (LA)Gross horsepower, 1968 (1962 for 318-A)190 @ 4400230 @ 4400Torque, lbs.-ft. , 1968260 @ 2000340 @ 2400Compression ratio, 19689.0 to 19.2 to 1Bore, inches3.633.913 more rows

Is a Dodge 318 a good motor?

The Good And The BadIn terms of durability, the Mopar 318 is robust. The bottom end of most 318 engines used a cast-iron crankshaft, and though these are not as desirable as a forged crank, the cast-iron piece has proven to be very reliable.

How much HP can a Mopar 400 block take?

For the 1972 cars, they used the Holley 2210 two-barrel. The huge displacement, topped by a two-barrel, gave the 400 somewhat less of a reputation than it may have deserved, but it was generally just about 25 horsepower less than a similarly equipped 440….The 400 V8: Final Mopar Big Block Engine.1976horsepowertorque2-barrel1753004-barrel HP2403251 more row

How can I get more horsepower out of my Dodge 360?

The power output of the 360 Magnum engine can be increased with performance aftermarket modifications.Install a performance aftermarket cold-air intake system. … Upgrade to performance aftermarket headers. … Install a performance aftermarket exhaust system.

What engine is better 318 or 360?

The advantage of the 360 over the 318 for a street/strip engine is the obvious cubic inch advantage, the longer stroke crank has more leverage for more torque, and the larger bore size lets you use cylinder heads with larger valves for more airflow.

Can you put 360 heads on a 318?

You can run the 360 manifold on the 318 heads just use the 360 intake caskets. Your really only other option would be to get a manifold made for a 318.. Most Edelbrock manifolds are 360 runner sized already but they fit a 318. Motor looks great.

Are 318 and 360 Magnum heads the same?

318 and 360 magnum heads are the same casting. 58cc chambers and 1.92/1.625 valves. Your 360 heads are probably just 1.88/1.60 and something like 75cc. The magnums have a 1.6 ratio rocker arm so that will raise your cam lift .

How much does it cost to rebuild a 360 engine?

A typical engine rebuild is between $2,500 and $4,000 in parts and labor costs. This type of engine repair might include simply replacing bearings and seals, and obviously taking the engine out and re-installing it. It could be much higher too.

How much horsepower does a 360 engine have?

With its introduction in1971, the Dodge 360 was one of nine V8 engines offered. Its initial horsepower rating was the second lowest of the V8 family for the model year. The 360 featured an 8.7:1 compression ration and 255 horsepower at 4,400 rpm. Its torque was 360 ft.

What is the best Dodge Ram engine?

Why the Ram 1500’s V6 is the best choice But when given the choice, MotorTrend chooses the 2019 Ram 1500 with the six-cylinder eTorque engine. Though the V8 may be quicker off the line, MotorTrend experts see no point in the added power if you’re not planning on racing your new pickup.

How much horsepower does a 5.9 360 have?

230 hp5.9 L Magnum V8 This was based on the LA-series 360 cu in (5.9 L) engine, and included the same upgrades and design features as the 5.2 L. The standard 5.9 L created 230 hp (172 kW) at 4,000 rpm and 330 lb⋅ft (447 N⋅m) at 3,250 rpm.

What truck has the longest lasting engine?

Longest-lasting trucksHonda Ridgeline, 3.0 percent.Toyota Tacoma, 2.6 percent.Toyota Tundra, 2.6 percent.Chevrolet Silverado 1500, 1.9 percent.Ford F-150, 1.8 percent.