Quick Answer: How Do I Know What Size My Headset Is?

How do you measure steerer tube length?

So, how does one figure out the correct steerer tube length.

Measuring the bike’s head tube and factoring in the headset and stem’s stack height, along with any additional spacers (or upper crown if the fork is a dual crown model) is one way, but we far prefer to do go with the test fit method described below..

Why is there play in my headset?

If the headset is loose, you’ll feel the play when you do this. Headsets usually become loose because one of the headset pieces changed positions, or as a result of the stem and top nut loosening. To fix this requires tightening and locking the adjustment so it stays in place.

How much does it cost to tighten headphones?

3. Tighten the top cap. When tightening the headset top cap it MUST push down on the stem, or the spacer above it, and not the fork column itself (the top cap pushes down on the headset which tightens it up). Do up the headset top cap until it is just tight — at this point you should be unable to turn your stem spacers …

Should I grease headset cups?

Grease The Top And Bottom Headset Cups On the dust cap specifically, it is easy to apply too much grease. When the headset is filled with too much grease, some will make it out the side of the top cap and start to collect dirt when riding.

How do you fit a threadless headset?

How to install a threadless headsetLightly grease the head tube of the frame where the headset cups will contact. … Slide the top cup onto the upper race of the headset press, and insert the headset press through the top of the head tube.Slide the bottom cup onto the lower portion of the headset press, and install the lower race of the headset press.More items…

What is an integrated headset?

Integrated headsets use cartridge bearings that fit inside a head tube that’s shaped specifically to hold them. The frame acts as a cup for bearings that you can just slot in and lift out without the need for any special tools.

How often should you grease your headset?

Once a year or 10,000 miles…which ever comes first. Once a year, give or take. Though I should be more proactive, because the first time the headset told me it was time.

Is a loose headset dangerous?

Threaded headsets can come loose often and when it happens on the road you usually can tighten it enough by hand to get you home safe. Your fork and front wheel are not going to come flying off. Have it professionally adjusted soon if you are not comfortable doing it yourself as to not cause any damage to the parts.

What is a threadless headset?

Unlike a threaded headset, a threadless headset does not have a threaded top headset race or use a threaded steerer tube. Instead the steerer tube extends from the fork all the way through the head tube and above the headset, and is held in place by the stem clamped on top.

How do you install a threaded headset?

Headset AssemblyGrease bearing retainers and bearing race cups. Grease also the threads of the steering column.Install bearing retainers into cup shaped races.Place fork through head tube.Thread on adjusting race onto steering column. … Install spacers and accessories as appropriate.Install locknut.